§ 15.32.090. Transmission lead-in conductors

All wiring in connection with the installation and operation of a television receiving set shall be in accordance with the latest edition of the National Electrical Code, which is made part of this chapter. The transmission lead-in conductor shall be kept at least twelve (12) inches clear of all existing telephone or electrical light or power wires, and be properly supported to prevent their swinging into these conductors in case the transmission lead-in conductor should break. All lead-in conductors must be adequately protected with approved type lightning attesters. When lead-in conductors of poloyethylene ribbon or any other type, except coaxial cable with grounded sheath, are used, lightning attesters shall be connected to each conductor. The attester shall be located at the point where the lead-in enters the building and shall be properly grounded.

(Prior code § 4-709)